
Hydrostatic Tank Contents Level Gauge
Hydrostatic contents gauge suitable for tanks with both cylindrical and horizontal cross sections.
Compatible with tanks ranging from 900 to 3000mm in depth.
Displays the remaining tank contents as a percentage, accurate to ±1%
Simple to install, completely pneumatic actuation, requires no electrical supply or maintenance.
The sensor which is situated in the tank is connected to the wall mounted readout (display) by a 10mm diameter capillary tube.
Available with either a 10m or 20m interconnecting capillary tube which can be cut to length.
Specification |
Gauge | Hydrostatic Contents Level Gauge |
Display | 150mm diameter, increments of 2% |
Range | 10m and 20m options |
Power Supply | N/A |

To install the gauge is not difficult, as most plastic and steel tanks made in the last 5 years will already have a pre-cut aperture, in the unlikely event that this is not the case an industry standard 32mm / 1" BSP diameter hole will need to be cut into the tank.
Instructions |
![]() |
![]() ![]() ![]() ![]() ![]() |