
12v ATEX Fuel Transfer Pump :: EXD FR1210
An industry recognised 12v ATEX transfer pump, available as either pump only or complete with 4m EN1360 petrol hose and ZVA nozzle.
The ergonomic design enables the pump for direct mounting onto either drums or directly on to the tank. It is easily fitted and supported using the 2” BSP mounting boss.
The system includes a control switch integrated into the nozzle holster ensuring that the pump is not left running unattended.
In addition, an internal bypass set to 0.83 bar helps protect the system from overpressuring. The 12 volt motor has a duty cycle of 30 minutes and is thermally protected.
Specification |
Pump | FR1210 |
Type | Self Priming Vane Pump |
Materials | Corrosion Treated Cast Iron |
Aluminium, Stainless Steel, Zinc Plated Steel |
|
Polyester, Ceramic, Acetal |
|
Fluroelastomer & Buna N Seals |
|
Delivery | 56 litre/min (0.83 bar max) |
Fittings | 1" BSP Inlet |
¾" BSP Outlet |
|
Pressure (max) | 0.83 Bar (regulated) |
Suction Lift | 2.4m self priming |
Fluid Viscosity | 1~5.35 cSt |
Temp Range | -26°C to +55°C |
Motor | 12v DC (ATEX Certified) |
RPM | 2600 |
Power | 0.186 kW / ¼ HP |
Current Draw | 20A |
Certification | ATEX II2 G EEx d T6 |
Protection Class | IP55 |

The flameproof EEx d Atex certified motor is suitable for most types of fuel including Petrol, Kerosene, Hexane, Diesel & Gasoil.
Manual |
![]() |
![]() ![]() ![]() ![]() |