Waste Oil Transfer Pump :: P80
Flexible impellor oil pump suitable for the efficient transfer of fluids with suspended particles and varied viscosity.
The totally enclosed single phase motor delivers 0.55kw of power to the pump head enabling flow rates up to 80 litre/min
Suitable for viscosities up to 200cSt. The pump benefits from 30 minutes dry running protection and a dry priming suction lift of over 4m.
Additionally the pump has the capacity to handle both hard and soft solids up to 8mm diameter making this model particularly suitable for most high flow oil transfer pump applications.
| Pump |
P80-N |
| Type |
Flexible Impellor Pump |
Materials
|
Corrosion Resistant Bronze Body
Oil Resistant Nitrile Impellor
Stainless Shaft
Fluroelastomer Seals |
| Delivery |
80 litre/min (1.6 bar max) |
| Pressure (max) |
3 Bar |
| Dry Prime |
4m self priming |
| Noise Level |
< 70 dB(A) |
| Fluid Viscosity |
1~200 cSt |
| Temp Range |
4°C to +80°C |
| Duty Cycle |
40 mins |
| |
|
| Motor |
230v Single Phase 50Hz ~ 0.55 Kw |
| Protection Class |
IP55 |
| RPM |
1450 |
| Current Draw |
|
Please note whilst this pump is suitable for collecting waste vegetable oils as part of the biodiesel production process, frequent operation will wear the flexible impellor quickly, this is normal for this pump when employed into this type of application. Replacement impellors are available to order from the drop down menu below.
|
