Home :: Fuel Transfer Pumps :: Electric Transfer Pumps :: PIUSI CUBE 70 Electric Fuel Pump Kit
PIUSI CUBE 70 Electric Fuel Pump Kit
PIUSI CUBE 70 Electric Fuel Pump Kit
(0 reviews)  

Stock No: 591000
Weight: 22.00 kg
£540.00 +VAT
£648.00  incl VAT
seen it cheaper?
Which Model?
  • ask a question about this product

Fuel Transfer Pump :: PISUI Cube 70

The PIUSI Cube has been developed to provide a single packaged kit which is both quick and easy to install. Available for either wall or pedestal mounting, the unit can be supplied in one of two flow rate options.

Utilising our best selling Panther Fuel Pump which is combined with a K33 Flow Meter. The whole system is encased in a rugged steel housing.

The original design also incorporates a control switch which ensures that the pump is turned off as soon as the nozzle is replaced into the integral holster.

Supplied as standard with a 230/1/50 AC weatherproof motor the system is suitable for permanent outdoor use, the system can also be supplied with a 12/24v DC operated pump making it suitable for mobile refuelling.

Model Range
Cube 70
Corrosion treated cast iron pump head
Aluminium meter
Sintered steel rotor
Acetalic vanes
Fluroelastomer seals
Inlet Fitting
1" BSP(F) with 2" BSPP Tank Boss
1" BSP(F) outlet
70 litre/min (1.9 bar max)
Dry Prime
2.5m self priming
Suction Lift
4m primed (c/w NRV)
Protection Class
IP55 suitable for outdoor use
Noise Level
< 75 dB(A)
Fluid Viscosity
2~5.35 cSt
Temp Range
-20°C to +55°C
Motor Options  
72 litre/min
230v Single Phase 50Hz ~ 0.55 Kw 2900 RPM (3.3 Amp)
35/72 litre/min
12/24v DC ~ 2.2 Kw 2900 RPM (30 min run max) (16/25 Amp)
Protection Class
Flow Meter
20 ~ 120 litre/min
1x 3 digit resettable display
1x 6 digit accumulative totaliser
Filling Nozzle
80 litre/min (max)
25.0mm External Diameter
1" BSP(F) Stainless Swivel
Dispensing Hose
Cube 72 Height: 314mm
optional pedestal
  Width: 389mm
  Depth: 370mm
Pedestal Height: 1027mm
  Width: 336mm
  Depth: 281mm

The pump, as standard, is robust enough to support itself either on top of the tank or with the inlet screwed directly onto the suction pipe, providing of course that the tank/pipe work will accommodate the pumps weight (24kg), for more information please refer to the manual which can be downloaded below.

Optional wall mounting brackets and a floor standing pedestal are also available.

fuel pump manual
Suitable for diesel EN590Suitable for Gas OilSuitable for B20