Waste Oil Transfer Pump :: P40
Flexible impellor oil pump suitable for the efficient transfer of fluids with suspended particles and varied viscosity. Available in both 230/1/50 & 400/3/50, the standard version handle fluids with a viscosity up to 200cSt at flow rates up to 35 litre/min.
A high viscosity variant of the 230v version is also available, capable of transferring waste oils up to a maximum viscosity of 1000cSt at a reduced speed of 20 litre/min.
Suitable for both waste vegetable and mineral oils. Additional features of this waste oil pump include dry running protection, an impressive 4m self priming suction lift and the capacity to handle solids up to 4mm diameter.
All the characteristics of the P40 make it an ideal choice for the transfer of waste oils and lubricants both in and out of the workshop.
Specification |
| Pump | P40-N |
P40-H |
| Type | Flexible Impellor Pump |
Flexible Impellor Pump |
| Materials | Corrosion Resistant Bronze Body |
Corrosion Resistant Bronze Body |
Oil Resistant Nitrile Impellor |
Oil Resistant Nitrile Impellor |
|
Stainless Shaft |
Stainless Shaft |
|
Fluroelastomer Seals |
Fluroelastomer Seals |
|
| Fittings | 1" | 1" |
| Delivery | 35 litre/min (1.6 bar max) |
20 litre/min (1.6 bar max) |
| Pressure (max) | 3 Bar |
3 Bar |
| Dry Prime | 4m self priming |
4m self priming |
| Noise Level | < 70 dB(A) |
< 70 dB(A) |
| Fluid Viscosity | 1~200 cSt |
50~1000 cSt |
| Temp Range | 4°C to +80°C |
4°C to +80°C |
| Duty Cycle | Continuous |
Continuous |
| Motor Options | ||
| 35 litre/min | 230v Single Phase 50Hz ~ 0.25 Kw |
230v Single Phase 50Hz ~ 0.25 Kw |
| 20 litre/min | 415v Three Phase 50Hz ~ 0.37 Kw |
N/A |
| Protection Class | IP55 |
IP55 |
| RPM | 1450 |
980 |
| Current Draw | 6.0A (peek) |
6.0A (peek) |
Please note: this pump does not feature a bypass facility as standard, damage can occur to the pump impellor if the unit is left running against a closed nozzle or closed valve.
If using this pump as part of a transfer system with either a nozzle or isolation valve the use of a bypass valve is highly recommended. An adjustable bypass valve kit is available from the drop down menu above.
| Downloads |
 |
  |
| Datasheet Manual |