
Fuel Suction Hose :: Vacupress Oil
Thermoplastic hose made from a PVC / Polyurethane / Nitrile Rubber compound and incorporating an integral steel helix and polyester re-enforcement yarn.
As both the inner and outer hose walls are both made from the same material this hose is suitable for permanent immersion in fuels and oils.
The internal helix provides unrivalled flexibility, even at low temperatures.
Temperature Range: -25°C +55°C
Applications: Suction hose for hydraulic oils and diesel fuels, cannot be used as a delivery hose for diesel or gas oil installations (unless offshore) due to DSEAR regulations which call for an Anti-Static delivery hose in diesel delivery systems.
Specification |
I.D. mm. |
Wall Thickness (mm) |
Weight gr./mtr. |
Bend Radius mm. |
Vacuum m.H2O |
Working Pressure 20°C bar |
Burst Pressure bar |
Coil Length mtr. |
19 | 4.5 | 400 | 70 | 9 | 16 | 48 | 60 |
25 | 5.25 | 640 | 80 | 9 | 16 | 48 | 60 |
32 | 5.25 | 800 | 100 | 9 | 16 | 48 | 60 |
38 | 6.5 | 1200 | 125 | 9 | 14 | 42 | 40 |
50 | 6.5 | 1750 | 150 | 9 | 12 | 36 | 40 |

Unit of Measure |
Supplied by the coil, cut lengths on request. | ![]() ![]() ![]() ![]() |