Cim-Tek Tank Dryer

In stock
Not rated yet
  • £14.34 incl. VAT
  • £11.95 + VAT
  • Diesel (EN590)
    Gas Oil (BS2869)
    HVO (EN15940)
    Kerosene (BS2869)
    GTL
    Suitability: Diesel (EN590)
Buy more for less:
1-11 items £11.95 / each  
12 or more items £9.95 / each save 16.74%
Qty:  
OR

The Cim-Tek tank dryer is a unique product which enables you to absorb water from your fuel tank without the need to install filters or conduct an expensive pump out. The Cim-Tek tank dryer is suitable for both single-skin and bunded tanks.

Each unit absorbs up to 440ml of water from the tank before becoming full and begins to work as soon as it is placed in the tank.

Simply lower one or more tank dryers into the fuel storage tank through either the fill point, vent or inspection hatch and then tie them off using the supplied oil-resistant cord.

Once placed in the tank the absorbent sock will begin to work straight away and within one hour is ready to be checked. After a week the tank dryer should be removed from the tank, it is easy to pass the swollen sock back through the fill point even when full.

Water can be found in fuel tanks through a variety of sources, mostly caused by condensation on the inner tank wall which coalesces and settles at the bottom of the tank over time. Rain and even melting snow which enters the tank through the vent (or open lid) can also contribute to the amount of water collected.

Suitable for both plastic and steel fuel tanks. Available to purchase either singly or at a discounted rate in a pack of 12 units.

    • Weight
      0.1 kg
    • Stock No
      60038
  • Manufacturer
    Cim-Tek
  • Product Type
    Absorbent
  • Filter Type
    • Element Type
      Hydrosorbent
    • Filter Element Media
      Hydrosorb
    • Cleanable / Replacement
      Replacement
  • Compatibility
    • Suitability
      Diesel (EN590), Gas Oil (BS2869), HVO (EN15940), Kerosene (BS2869), GTL
Customer reviews
There are no comments yet. Be the first to leave a comment
Please sign in to add review