Elaflex ZVA Slimline 2 Nozzle
Approved for retail dispensers the ZVA slimline 2 nozzles are installed at almost every single forecourt throughout the UK and into Europe.
The automatic shut off design ensures that the delivery of fuel is isolated once the fluid level reaches the end face of the spout. Additional features include: Venturi type automatic shut-off with safety cut-out valve. Integral check valve. 2-speed lever latch with removable latch pin, 1" or ¾" aluminium swivelling inlet and multiple guard options.
Meets requirements of EN 13012, ATEX category EX II 1G, all European regulations for weights and measures and SIRA 03ATEX9 487U. TÜV approval P-TÜ7-01930.
Specification |
| Nozzle | ZVA2 R Slimline |
ZVA2 (H) |
| Type | Automatic shut off |
|
| Materials | Aluminium Body |
|
Stainless Steel, Steel Acetal Resin Internals |
||
NBR/polyurethane Seals |
||
PVC Guard, Optional Brass Swivel |
||
| Max Flow | 55 litre/min |
80 litre/min |
| Spout Diameter | 21mm Dia |
25mm Dia |
| Pressure (min) | 7.3 PSI (0.5 Bar) |
|
| Pressure (max) | 50 PSI (3.5 Bar) |
|
| Temp Range | -20°C to +55°C |
|
| Connection Options | ¾" BSP (female) Swivel |
|
¾" BSP (male) Swivel |
||
¾" NPT (female) Swivel |
||
1" BSP (female) Swivel |
||
1" BSP (male) Swivel |
||
1" NPT (female) Swivel |
||
 |
Suitable for Petrol, Gasoline (also with ethanol content), diesel, fuel oils and biodiesels.
ZVA nozzles are highly configurable and can be customised to suit specific applications. Various options exist including inlet fitting, guard type and spout pattern. Most installations will call for the standard configuration which is;
| Diesel dispensers: | ZVA2 4.1 |
| Petrol dispensers: | ZVA2 4.1R |
For more details please refer to the datasheet which can be downloaded below, please feel free to contact us if you require assistance or prefer to discuss your application in more detail, our Customer Services team can be reached on 0845 688 9755.
| Downloads |
 |
     |
full spec |
Was the above review useful to you? 
