
CEMO Cube AdBlue Dispensing Tank
Manufactured by CEMO GmbH, the German engineered range of CUBE storage solutions have proven popular for installations where space is at a premium.
The unique design ensures that the fully bunded tank system takes up the minimum amount of space without compromising on storage capacity. Two sizes are available: 1500L & 2500L. If additional capacity is required then a 2500L extension can be added to either of these models increasing the volume up to 5000L capacity.
Each CEMO Cube features an integral dispenser complete with PIUSI AdBlue dispensing system. Options include both indoor and outdoor models with the outdoor model including weatherproof housing, insulation and a heater. Further to this the outdoor model can also be equipped with an optional hose reel and/or K24 flow meter.
As per ISO 22241, all of our AdBlue storage systems are engineered from suitable materials ensuring that the product quality is not compromised by coming into contact with incorrect materials of construction.
Specification |
Tank | Bunded AdBlue storage tank with dispensing equipment |
Models | 10302, 10304, 10306 |
Volume | 2500 litre |
Bund Capacity | 110% |
Material | UV Stabilised chemically resistant MDPE |

Equipment | |
Pump | 35 litre/min 230v AC PIUSI membrane pump |
Flowmeter | OPTION: K24 Turbine Meter with electronic display (Accuracy ±1%) |
Delivery Hose | 19mm ID x 6m length AdBlue delivery hose (optional hose reel) |
Nozzle | Stainless Automatic Nozzle |
Gauging | Ascending clock contents gauge (%) |
Spill Protection | • 50mm Spill Free Man-tek Fill Coupling |
• Fully Bunded Construction |

![]() |
||||||||||
|
||||||||||
Installation
Tank is supplied ready to be installed, simply offload and connect 230v 13A supply to the pumps motor. Tank should be installed on to a suitable prepared base (solid, non-combustible and able to support the weight of the tank when full, ie: existing yard concrete or tarmac).
Environmental Responsibility
AdBlue is delivered into the tank under pressure. In the highly unlikely event of a spill occurring during filling, you will need to ensure that there is either a running water supply, pressure wash equipment or other spill response planning (spill kit & eyebath) available before we are able to fill the tank, our site inspector will undertake the necessary risk assessment on site before we commence filling. There is no charge for the inspection/risk assessment.
Service
Commercial Fuel Solutions Ltd ensure that all members of the respective technical sales and customer support teams are fully trained on the installation, operation and service requirements of all our products. Technical Support is available 24 hours a day, 365 days a year via our support number 0845 189 9880. A suitably qualified engineer is on call at all times during out of office hours.
Downloads | ![]() |
![]() |
||
brochure |