Home :: Valves + Fittings :: Plastic Combi Vent Cap
Plastic Combi Vent Cap
Plastic Combi Vent Cap
(0 reviews)  

Stock No MF6164
Weight 0.10 kg
£7.50 +VAT
£9.00  incl VAT
seen it cheaper?
  • ask a question about this product

Plastic Combi Vent Cap

The Plastic Combi Vent Cap is built to sit on the top of a heating oil storage tank above the ground and fits over a 2” male thread.

The Combi Vent Cap comes with an additional 1 ½” female top thread that can be used alongside a float gauge.

There are two screws on either side of the cap to enable cutting into the male thread on the tank to hold the vent in place.

Locking Fill Point
1 1/2" BSP Thread to attach to Float Gauge


suitable for dieselsuitable for biodieselSuitable for oilsuitable for kerosenesuitable for gas oil
Fuel Proof FuelStore :: ADR Approved Storage Tank :: 1500L
£2065.00 £2478.00
Air 1 AdBlue :: 210L Drums (Supplied in Multiples of 2)
£241.50 £289.80
GPI G2 Series Brass Meter :: 1"
£540.00 £648.00
Petrol Engine Operated Fuel Pump :: 500 Litre/min
£270.00 £324.00
PIUSI Viscomat Oil Transfer Gear Pump
£205.00 £246.00
Lubricant Hand Pump :: OK 9B
£52.00 £62.40
Horn W85 Inox Drum Pump System
£295.90 £355.08
Piusi Panther DC :: 12v or 24v
£118.00 £141.60
Stainless Steel Flange :: Slip-On Table E
£2.99 £3.59
There have been no reviews

Only those who bought this product are allowed to add review
If you've already bought this product, please sign in and add your own review!
The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the Special menu.