Home :: Delivery Nozzles :: Manual Nozzles

Manual Nozzles

Manual nozzles are suitable for both gravity feed and pumped applications, unlike automatic nozzles which are typically designed for refuelling applications, manual nozzles can be used on more viscous fluids and are suitable for dispensing a wide range of fluids including fuels, oils and chemicals.

Available in a wide range of materials, dispensing nozzles are a low cost solution to many fuel transfer applications.

PLEASE NOTE: when dispensing fuels or oils outdoors a requirement within the Oil Storage Regulations exists to ensure that the nozzle cannot be left in the open position which could risk an environmental incident through overfilling. Latching triggers should be disabled when dispensing fuels.

Products

  •  per page
£248.00 +VAT
Quantity
Manual Nozzle :: AD Tanker Oil and Diesel Nozzle
Stock No: PF3060
Manual Nozzle :: AD Tanker Oil and Diesel Nozzle
• up to 415 litre/minute
• aluminium construction
• supplied with 1½" F swivel
£9.95 +VAT
Quantity
Manual Nozzle :: Economy
Stock No: 630000
Trigger Nozzle :: Plastic
  • up to 80 litre/min
  • 34mm Ø spout
  • suitable for antifreeze and diesel
  • £277.02 +VAT
    Quantity
    Manual Nozzle :: High Speed Biodiesel and Diesel Nozzle
    Stock No: PF5018
    Manual Nozzle :: High Speed Diesel and Biodiesel
    • up to 250 litre/minute
    • aluminium construction
    • suitable for gravity fed or pumped applications
    £15.95 +VAT
    Quantity
    Manual Nozzle :: Self 2000
    Stock No: 641000
    Trigger Nozzle :: Self 2000
  • up to 120 litre/min
  • 25mm Ø spout
  • suitable for gravity fed and pumped applications
  • £18.95 +VAT
    Quantity
    Manual Nozzle :: Self 3000
    Stock No: 650000
    Trigger Nozzle :: Self 3000
  • up to 150 litre/min
  • 25mm Ø spout
  • suitable for gravity fed and pumped applications
  • £39.95 +VAT
    Quantity
    PIUSI Urea Manual Dispensing Transfer Nozzle
    Stock No: F14280000
    Dispensing Nozzle for AdBlue (Air 1®) :: Manual shut off
    • polypropylene body
    • 19mm diameter stainless steel spout
    • suitable for pumps and manual dispensing
    •  per page
     
    The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the Special menu.