Home :: Fuel Transfer Pumps :: Electric Transfer Pumps :: Utility 40 Waste Oil Transfer Pump :: P40
Utility 40 Waste Oil Transfer Pump :: P40
Utility 40 Waste Oil Transfer Pump :: P40
 
(0 reviews)  

Stock No 53041-2053-230
Weight 11.20 kg
 
£399.00 +VAT
£478.80  incl VAT
seen it cheaper?
Which Model?
Bypass Kit?
Quantity
  • ask a question about this product

Waste Oil Transfer Pump :: P40

Flexible impellor oil pump suitable for the efficient transfer of fluids with suspended particles and varied viscosity. Available in both 230/1/50 & 400/3/50, the standard version handle fluids with a viscosity up to 200cSt at flow rates up to 35 litre/min.

A high viscosity variant of the 230v version is also available, capable of transferring waste oils up to a maximum viscosity of 1000cSt at a reduced speed of 20 litre/min.

Suitable for both waste vegetable and mineral oils. Additional features of this waste oil pump include dry running protection, an impressive 4m self priming suction lift and the capacity to handle solids up to 4mm diameter.

All the characteristics of the P40 make it an ideal choice for the transfer of waste oils and lubricants both in and out of the workshop.

Specification
Pump
P40-N
P40-H
Type
Flexible Impellor Pump
Flexible Impellor Pump
Materials
Corrosion Resistant Bronze Body
Corrosion Resistant Bronze Body
 
Oil Resistant Nitrile Impellor
Oil Resistant Nitrile Impellor
 
Stainless Shaft
Stainless Shaft
 
Fluroelastomer Seals
Fluroelastomer Seals
Fittings 1" 1"
Delivery
35 litre/min (1.6 bar max)
20 litre/min (1.6 bar max)
Pressure (max)
3 Bar
3 Bar
Dry Prime
4m self priming
4m self priming
Noise Level
< 70 dB(A)
< 70 dB(A)
Fluid Viscosity
1~200 cSt
50~1000 cSt
Temp Range
4°C to +80°C
4°C to +80°C
Duty Cycle
Continuous
Continuous
 
Motor Options  
35 litre/min
230v Single Phase 50Hz ~ 0.25 Kw
230v Single Phase 50Hz ~ 0.25 Kw
20 litre/min
415v Three Phase 50Hz ~ 0.37 Kw
N/A
Protection Class
IP55
IP55
RPM
1450
980
Current Draw
6.0A (peek)
6.0A (peek)

waste oil pump diagram

Please note: this pump does not feature a bypass facility as standard, damage can occur to the pump impellor if the unit is left running against a closed nozzle or closed valve.

If using this pump as part of a transfer system with either a nozzle or isolation valve the use of a bypass valve is highly recommended. An adjustable bypass valve kit is available from the drop down menu below.

Downloads
 
Waste Oil Pump Data Sheet
suitable for waste oil
Datasheet Manual  
Fuel Hose Reel :: Manual :: 25mm x 20m
£424.00 £508.80
Elite Grand Oil Only Pads :: 200 Series
£45.00 £54.00
Fuel Hose Reel :: Self Winding :: 25mm x 30m
£592.00 £710.40
Stainless Steel Equal Union :: Male/Female
£5.10 £6.12
 
Stainless Steel Union Conical :: Female/Female NPT (6000lb)
£47.38 £56.86
Potable Water Storage Tank :: 1250L
£410.00 £492.00
Underground Water Storage Tank :: 3090L
£1029.00 £1234.80
Hydrostore Garden Harvest :: GH1500
£1275.00 £1530.00
 
Hydrostore Home Harvest Gravity :: HG1500
£2195.00 £2634.00
There have been no reviews

Only those who bought this product are allowed to add review
If you've already bought this product, please sign in and add your own review!
 
The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the Special menu.