Fuel Transfer Pump :: PIUSI Cube
The PIUSI Cube has been developed to provide a single packaged kit which is both quick and easy to install. Available for either wall or pedestal mounting, the unit can be supplied in one of two flow rate options.
Utilising our best selling Panther Fuel Pump which is combined with a K33 Flow Meter. The whole system is encased in a rugged steel housing.
The original design also incorporates a control switch which ensures that the pump is turned off as soon as the nozzle is replaced into the integral holster.
AC motor options include single phase 110v & 230v, a 12v DC version can also be supplied.
Specification |
| Model Range | Cube 56 |
| Pump | |
| Materials | Corrosion treated cast iron pump head |
Aluminium meter |
|
Sintered steel rotor |
|
Acetalic vanes |
|
Fluroelastomer seals |
|
| Inlet Fitting | 1" BSP(F) with 2" BSPP Tank Boss |
| Outlet | 1" BSP(F) outlet |
| Delivery | 56 litre/min (1.9 bar max) |
| Dry Prime | 2.5m self priming |
| Suction Lift | 4m primed (c/w NRV) |
| Protection Class | IP55 suitable for outdoor use |
| Noise Level | < 75 dB(A) |
| Fluid Viscosity | 2~5.35 cSt |
| Temp Range | -20°C to +55°C |
| Motor Options | |
| 56 litre/min | 110v Single Phase 50Hz ~ 0.50 Kw 2900 RPM (5.5 Amp) |
| 56 litre/min | 230v Single Phase 50Hz ~ 0.37 Kw 2900 RPM (2.4 Amp) |
| 56 litre/min | 12v DC ~ 0.42 Kw 2900 RPM (30 min run max) (35 Amp) |
| Protection Class | IP55 |
| Flow Meter | |
| Range | 20 ~ 120 litre/min |
| Accuracy | ±1% |
| Display | 1x 3 digit resettable display |
1x 6 digit accumulative totaliser |
| Filling Nozzle | |
| Range | 80 litre/min (max) |
| Spout | 25.0mm External Diameter |
| Fitting | 1" BSP(F) Stainless Swivel |
| Dispensing Hose | PVC/NBR 25mm ID |
| Length | 4.0m |
| Cube Pump | Height: | 297mm |  |
| Width: | 378mm | ||
| Depth: | 430mm | ||
| Pedestal | Height: | 1027mm | |
| Width: | 336mm | ||
| Depth: | 281mm | ||
The pump, as standard, is robust enough to support itself either on top of the tank or with the inlet screwed directly onto the suction pipe, providing of course that the tank/pipe work will accommodate the pumps weight (22kg), for more information please refer to the manual which can be downloaded below.
Optional wall mounting brackets and a floor standing pedestal are also available.
| Manual |
 |
   |