Biodiesel Mixing Pump :: BMP90
The biodiesel mixing pump was produced to address increasing demand from the industry.
Equipped with twin self priming hydraulic pumps and proportional linear control valves the unit accepts an inlet from both mineral and bio diesel storage tanks.
Capable of delivering a mix of EN14214 Biodiesel blended with EN590 Mineral road diesel defined by the operator anywhere between B5 to B95.
| Pump |
BMP90 |
| Type |
High Accuracy Biodiesel Mixing Pump |
Materials
|
Aluminium Pump Head
Stainless Drive
Teflon Seals
Steel Chassis
|
| Delivery |
70~90 litre/min (1.7 bar max) |
| Fittings |
Twin 1½" BSP Inlet |
| |
Single 1" BSP Outlet |
| Pressure (max) |
1.9 Bar (regulated) |
| Suction Lift |
3.0m self priming |
| Fluid Viscosity |
1~230 cSt |
| Temp Range |
-10°C to +55°C |
| Mixer |
Proportional Linear Control |
| Ratio |
B5 to B95 (1:20) |
| Configuration |
User Adjustable with Access Key |
| Increments |
1% |
| Blend Accuracy |
±1.5% |
| Min Batch |
5 litres |
| Display |
Back Lit LCD Litre Counter |
| |
4.1 Digit Reset (9999.9) |
| |
6 Digit Non Reset (999999) |
| Meter Accuracy |
±0.2% |
| Certified |
pending |
| |
|
| Delivery Hose |
4m x 25mm ID EN1360 |
| Nozzle |
ZVA Slimline |
| |
|
| Motor |
2x 400v AC Three Phase 50Hz (ATEX Certified) |
| RPM |
2850 |
| Power |
2x 1.0 kw |
| Current Draw |
6A |
| Certification |
EEx d IIB T3 TUV 04 ATEX 2488X |
| Protection Class |
IP55 |
| Optional Extras: |
Management System |
| No of users |
60 (optional 130 & 1000 user systems on request) |
| Identify by |
User ID Key (10x included) |
| |
Vehicle ID |
| |
Combined User & Vehicle ID |
| Data Retention |
Supply Date & Time |
| |
User |
| |
Vehicle |
| |
Quantity Taken |
| |
Tachograph Reading |
| Data Transfer |
Memory Key (included) |
| Software |
Windows Based PC (included) |
Two models are available, one with management facilities, one without. Both systems are ATEX certified.
NB: Although capable of meeting the demands required for retail use (as the mixer pump is equipped with the required air separator and accurate to +/- 0.2%). This recently developed unit is currently pending approval with the Department of trade and industry for resale applications.
|
